- Economical replacement for JST SH Connector, similar specification & quality but low price.
- Compact, low profile design.
- Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum gripping equipment.
- The receptacle has protrusions on both ends for an operator to disengage the receptacle from the header without holding the wires.
SMT Connector WB1001 (SH) 1.0mm Pitch
Description
Product Profile
| Series: | WB1001 (SH) SMT Connector |
| Category: | Wire-to-Board type SMT Connector |
| Type: | Crimp style, Compact type, Disconnectable type |
| PC board mounting direction: | Side entry |
Model Explanation
| WB | 1001 | – | H | 02 |
| ① | ② | ③ | ④ | |
| ① | WB: Wire-to-Board Connector WW: Wire-to-Wire Connector BI: Board-in Connector |
|||
| ② | Series number | |||
| ③ | H: Housing T: Terminal PT: Top Entry type Pressure Welding Bar Wafer PS: Side Entry type Pressure Welding Bar Wafer ST: Top Entry type SMT Wafer SS: Side Entry type SMT Wafer |
|||
| ④ | Poles | |||
Specification
| Pitch: | 1.0 mm |
| Poles: | 2 ~ 20 P |
| Current rating: | 1.0 A AC/DC |
| Voltage rating: | 50 V AC/DC |
| Temperature range: | -25 ~ 85 ℃ |
| Contact resistance: | ≤ 20 mΩ |
| Insulation resistance: | ≥ 100 MΩ |
| Withstand voltage: | 500 V AC/minute |
| Applicable wire: | AWG #32 ~ #28 |
